Seal, Snap-On, For 1/2"Strap,
Reg Duty, 1" Length,.015-.023
6000/ctn
Open seals
are snapped onto overlapping
strap ends
either before or after
tensioning, to maintain strap
alignment when applied prior
to tensioning. Open
seals are use with R.D. strap
sizes on flat surfaces.
NOTCH JOINT :
One-way to lock strap ends is
to cut, or “notch” the seal
and the strapping it joins to
form tabs at the edges. These
tabs are bent down (down
notch joint) or bent up
(reverse notch joint). The
strength of the notch joint
comes from the mechanical
interlock between the seal
and strapping. Notch joints
are typically used on waxed
strapping in packaging and
unitizing applications.
